PFT Conveying Pump SWING L Overview – Operation – Spare Parts Lists
Work on troubleshooting
38
14/09/2021
38 Work on troubleshooting
38.1 Reaction in the event of faults
The following strictly applies:
1. In the event of faults presenting immediate danger to persons
or property, activate the emergency OFF function immediately.
2. Determine cause for fault.
3. If the rectification of faults requires works in the danger zone,
switch off the system and secure against restarting.
4. Inform the manager on site immediately about the fault.
5. Depending on the type of fault commission authorised skilled
personnel or rectify the fault yourself.
NOTE!
The following fault table gives information on who
is authorised to rectify the fault.
38.2 Fault displays
1 2
Fig. 54: Fault displays
The following unit indicates a fault:
Pos.
LED signal
Description
1
Red control
lamp
Lights up for a fault in the motor
protection switch.
Check the motor protection switch
2
Green control
lamp
Unlit in contact failure of the safety
sensors on material container
Fig. 55: Fault displays
See window in the
control box
for inverters
.
