PFT
Conveying Pump SWING L
Overview – Operation
– Spare Parts Lists
End of work /
14/09/2021
45
The machine must be cleaned every day after work and before
long breaks.
41.1.1 Switch off the SWING L FU
3 2 1
Fig. 63: Switch off the SWING L FU
1. Turn selector switch (1) to position "Zero" (middle position).
2. Press the red push button (2) control voltage "OFF".
3. Set the main switch (3) to position "0".
NOTE!
Mortar hoses and spray equipment must be
cleaned immediately after the end of work.
41.1.2 Switch off the SWING L
2 1
Fig. 64: Switch off the SWING L
1. Press the red push button (1) control voltage "OFF".
2. Set the main turner switch (2) to position "0".
NOTE!
Mortar hoses and spray equipment must be
cleaned immediately after the end of work.
41.2 Cleaning the SWING L
ATTENTION!
Water can enter sensitive machine parts!
Before cleaning the machine cover all openings in
which no water must enter for safety and functional
reasons (e.g. electric motors and control cabinets).
NOTE!
Do not direct the water jet on electrical parts, such as
gear motor or control cabinet.
