PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Proper use of the ZARGOMAT pro
14
2019-02-14
6.2 Special dangers
The following section details other elements of risk that can occur
according to the risk assessment.
Pay attention to the safety instructions and warnings in the other
chapters in order to reduce health risks and avoid dangerous
situations.
Electric current
DANGER!
Danger of death due to electric current!
Contact with live components can lead to death or
serious injury. Damage to electrical insulation or
individual components can be potentially life-
threatening.
Therefore:
If insulation damage occurs, switch off the
electrical supply immediately and organise
repairs.
Work on electrical systems should only be made
by qualified electricians.
When working on electrical systems, first ensure
that they are completely switched off and free of
voltage.
Before starting maintenance, cleaning or repair
work, switch off the power supply and secure it
against being switched back on again.
Do not bypass fuses or disable them. Pay
attention to the correct amp reading when
replacing fuses.
Keep electrical parts away from sources of
moisture. This can lead to a short-circuit.
Escaping material
DANGER!
Danger of injury due to escaping material!
Escaping material can cause injuries to the eyes
and face.
Therefore:
Always wear protective goggles.
When working, always stand so that escaping
mortar cannot hit you.
