PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Commissioning
22
2019-02-14
Safety
Fig. 3: Lock the lever
WARNING!
Risk of injury due to improper operation!
Abzugshebel sperren:
– Press the locking lever (1) upwards to lock the
lever (2).
17 Commissioning
17.1 Preparing the mortar hoses
1
Fig. 4: Preparing the mortar hose
1. Flush mortar hose with water.
2. Completely empty the mortar hose of water.
3. Prime the mortar hose by wetting it with about 1 litre of
wallpaper paste.
4. Connect the mortar hose (1) to the mortar pressure gauge.
5. Allow the machine to run until all the wallpaper paste
has emerged from the end of the mortar hose.
NOTE!
Make sure the couplings are clean and connected
properly, and do not leak. Dirty couplings and
rubber seals are leaky and allow water under
pressure to escape, which inevitably leads to
blockages.
Carefully secure risers so that they do not
tear away from their own weight.
DANGER!
Never detach hose couplings if the mortar hoses
are under pressure (check mortar pressure gauge).
Mixed material can escape under pressure and
lead to serious injuries, especially eye injuries.
Hoses that tear off can lash wildly and injure those
standing nearby!
1
2
