PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Cleaning end
26
2019-02-14
20.3 Cleaning the mortar hose
Fig. 11: Connect cleaner coupling
1. Connect the cleaner coupling (1) to the water tap (2).
2. Press the water saturated sponge ball (3) into the mortar hose
(4).
NOTE!
Do not rinse the mortar hoses with water before.
The material has to be pushed out of the hoses with
the sponge ball.
3. Connect the mortar hose (4) with the sponge ball to the cleaner
coupling (1).
4. Open the water tap until the sponge ball exits the spraying
device.
5. In case of strong soiling repeat this process.
21 Cleaning end
Fig. 12: Complete
1.
After the end of cleaning, re-fill the spraying gun
.
2
1
3
4
