PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Inspection
2019-02-14
5
1 Inspection
1.1 Inspection by machine operator
Prior to each shift, the machine operator has to examine the effectiveness of the
control and safety devices, as well as the proper fitting of the protection devices.
The safe working condition of construction machinery has to be checked by the
machine operator during operation.
If the safety devices show any defects or if any other defects are detected that
compromise a safe operation, the supervisor has to be informed immediately.
In case of defects that cause harm to persons, the operation of the construction
machine has to be stopped to eliminate the defects.
1.2 Periodic inspection
Construction machinery has to be inspected for their safe working condition in
accordance with the operating conditions and the operational requirements as
needed, however at least once a year by an expert.
Pressure vessels have to undergo the prescribed expert inspections.
The inspection results have to be documented and kept at least until the next
inspection.
