PFT ZARGOMAT pro Safety - Overview - Operation - Spare parts lists
Safety
2019-02-14
9
4 Safety
This section provides an overview of all important safety aspects.
These offer optimal levels of safety for personnel and safe and
problem-free operation.
Significant danger may result from non-compliance with the
operating steps and safety instructions detailed in this manual.
4.1 Operator responsibility
The equipment is intended for business use. The operator is then
subject to legal work safety obligations.
Apart from the work safety instructions detailed in this manual, all
valid safety, accident prevention and environmental protection
guidelines for the equipment must be adhered to. This especially
applies to the following:
The operator must be aware of the valid work safety
regulations. They are also responsible for determining
additional dangers resulting from the individual working
conditions on the operating site. These additional dangers must
be summarised as operational instructions for the correct use of
the equipment.
During the entire operation time of the equipment, the operator
is responsible for coordinating their instructions with the current
operational status and adjusting them as required.
The operator is responsible for clearly allocating and defining
the responsible parties for installation, operation, maintenance
and cleaning.
The operator must ensure that all persons employed with the
equipment have read and understood the manual.
Additionally, the operator must also carry out regular employee
training and inform them of the dangers associated with
equipment use.
The operator is also responsible for the technical functionality and
condition of the equipment. The following rules apply here:
The operator must make sure that the maintenance intervals
detailed in the manual are adhered to.
The operator must have all safety devices regularly checked for
functionality and completeness.
The operator must provide personnel with the necessary safety
equipment.
