PFT Conveying Pump ZP 3 XL MIX Part 2 Overview – Operation - Spare Parts Lists
Troubleshooting Tasks
Fehler! Formatvorlage nicht definiert.
29
10 Troubleshooting Tasks
10.1 Procedure in case of Trouble
Procedure in case of trouble
It applies basically that:
1.
In the case of faults that pose direct danger for persons or
property, perform the emergency-stop function immediately.
2.
Establish the cause of fault.
3.
In case the elimination of fault requires work in the danger
zone, switch off the system and secure it against reactivation.
4.
Immediately inform the person responsible at the operation
site about the fault.
5.
Depending upon the kind of fault, let it to be eliminated by
authorised professional personnel or eliminate it yourself.
HINT!
The following troubleshooting table gives
information about who is entitled to eliminate a
fault.
10.2 Trouble Indications
The following device indicates fault:
Fig. 37: Fault indications
Pos.
Lamp signal
Description
1
Control lamp
red
Motor protection switch illuminates in
case of fault.
Check the motor protection switches
Q2 - Q4
10.3 Faults
In the following chapter, possible causes of faults and the tasks of
eliminating them are described.
Due to increasingly occurring faults, shorten the maintenance
intervals according to the actual load.
Due to the faults that may not be eliminated by the following hints,
contact the dealer.
10
