NewFEIMAS
Refer to Revision Record on page 2.
T.Anzai
Nov. 20, 2008
K.Okada
Rev
04
03
PAGE
76
/
138
PFU LIMITED
P1PA03334-B30X/6
Refer to Revision Record on page 2.
T.Anzai
July 7, 2008
K.Okada
Refer to Revision Record on page 2.
K.Okada
K.Okada
DESCRIPTION
CHECK
DATE
T.Anzai
APPR.
K.Okada
K.Okada
Aug.19, 2005
DESIG
N
DESIG
.
CUST.
I.Fujioka
I.Fujioka
T.Anzai
CHECK
fi-5530C/fi-5530C2
IMAGE SCANNER
MAINTENANCE MANUAL
APPR.
TITLE
DRAW.
No.
Feb.23, 2007
05
Section 4-9-3
(4) Remove OPT unit with cable B. Remove CCD Cable B from OPT unit with cable B, when replacing it.
<Mounting>
Follow the removing procedure in reverse.
(1) If the mirrors inside the Optical unit is dirty, clean them with the blower brush or a dry lint-free cloth. Do not use alcohol
as it may stain the mirror.
(2) Do not remove parts described in
Section 4-5
.
(3) The cables should be routed in the way as shown above photo. Especially the cable shall be routed through slot A.
(4) After replacing Optical unit or Optical unit CB, run the following adjustment:
■ Offset adjustment (Refer to
Section 5-1-4
)
■ White balance adjustment (Refer to
Section 5-1-5
)
■ Magnification adjustment (Refer to
Section 5-1-3
)
