PG Drives Technology
8
R-net Bluetooth Modules Technical Manual | Chapter 1 - Operation
2
CONTROLS
The default programming relates to the operation of a Joystick Module fitted
with lighting controls. See the following diagram.
Any Input Device can be used to control a Bluetooth Module, as well as
External Switches connected to a Bluetooth Module via SW1 and SW2
Connectors, but programming of the R-net will be required. Refer to Chapter 3
for details.
Operation of the R-net Control System will vary depending on what
Input Devices are connected. Refer to wheelchair manufacturer’s
documentation to establish the correct setup requirements for the
wheelchair.
The Bluetooth Modules do not support scanner functionality.
