37
36
5. Insert the two head mounting plates into the recess like on
the picture.
Follow the current local regulations governing environmental protection to recycle or dispose of electrical
equipment at the end of its useful life.
PHACON GmbH
Druckereistrasse 11
04159 Leipzig
Germany
Tel.: + 49 (0)3 41 47 83 97 35
e-mail: support@phacon.de
www.phacon.de
Store the equipment within the specified environmental condition value(s) throughout its useful life. See the
Specifications section. To ensure the longevity, performance and safety of this equipment, use the original
packaging materials when transporting this equipment.
STORAGE AND HANDLING
RECYCLING
SUPPORT
1. First insert the manual into the recess.
Then insert the holder tray on the same position.
2. Lay the camera on top and position the two camera arms into
the recess next to the tray, the lenses facing upwards. The stem
lies to the left of the head fixation.
3. You can place the PHACON Temporal Bone Patient next to the
camera.
4. Cover the camera, holder tray and the patient with the second
layer of foam, containing a recess for the tracker box.
6. Place the head in the free space on the top of the holder tray.
Now you can close the case lid top gently.
TRAINER STORAGE – HOW TO PACK THE TRANSPORT CASE?
MESSAGE
CAUSE
ACTION
The LOGIN password or user name
is/are incorrect.
Enter correct LOGIN password or user
name. Pay attention to case sensitivity.
The group name field was left empty.
Please enter a unique group name.
The required field data was not provided.
CEnter a group name (maximum of 150
characters).
The entered group name already exists
in the trainer. Please enter a unique
group name.
The entered group name is already used.
Enter a new group name into the trainer
(maximum of 150 characters).
A maximum of 150 characters is allowed.
The entered group name consists of
more than 150 characters.
Enter a group name with a maximum of
150 characters.
The instrument or patient calibration
failed.
Recalibrate the instrument or patient or
use the classic.
The calibration was not successful.
In the setup menu:
No camera found.
The camera is not connected to the
notebook.
Make sure the camera is connected to
the notebook and click on TEST CONNECTION.
No camera found.
The camera is not connected to the
notebook.
Make sure the camera is connected to
the notebook and click on TEST
CONNECTION.
The LOGIN password or user name
is/are incorrect. Please try again.
ERROR MESSAGES
