PHAROS MARINE PHALCON 2000, Installation Manual

Phalcon 2000 Installation Guide

Ref: HB-09300/01  Issue 1 

1

Chapter 1  Installation and Maintenance

1.1  Job Set Up Information

Table 1 Tools and Equipment

Part No / Type

Description

Remarks

N/A

Torque Wrench

50-60 Nm (37-44 lbf)

Fluke 75

Multimeter

Current consumption test

N/A

Laptop PC or palmtop

RS232 plus terminal
emulator

Table 2 Consumable Materials

Material No.

Description

Remarks

Sealant

Seal connectors

Grease

Bolt lubrication

WARNING: BE CAREFUL WHEN YOU USE THE CONSUMABLE MATERIALS. OBEY THE

MANUFACTURE'S HEALTH AND SAFETY INSTRUCTIONS.

1.2 Maintenance 

Requirements

Following proper installation and commissioning, little maintenance should be necessary.

To ensure trouble-free performance, it is recommended that Phalcon 2000 be inspected and
cleaned, as detailed in the Phalcon 2000 Handbook (Ref: HB-09300/01  Issue 1).

1.3 Test 

Equipment

For all diagnostics and most repair work on the Phalcon 2000, you will need a multimeter and a
serial terminal, e.g. laptop computer that has an RS 232 interface connection and terminal
emulation program.