Physical Setup Guide
1. Plug AC power in to amplifier. Power should be solid green and WiFi/Bluetooth indicator is yellow. The amp is booting and
Wifi/Bluetooth light will flash green once it’s complete.
2. Screw the antennas onto the amplifier.
3. Use included screwdriver to open all positions on the euroblock.
Be gentle. Stop when you hit resistance, otherwise
the euroblock will break.
4. Insert speaker wires according to channel and polarity (Red is positive, black is negative).
5. Tighten screw terminal clamp on the euroblock down onto wire, ensuring a tight fit.
6. Attach euroblock connector to the amp.
