8. Set up is now complete and you are ready to start using your OS-440. You can now play music through your preferred music
platform (Amazon, Pandora, Spotify etc.) by utilizing the ‘Cast’ feature in each program.
9. If you ever need to change the network that your OS-440 is connected to:
9.1. Open the Google Home app and select the OS-440. If you renamed the device in the initial set up or have multiple devices,
be sure to select the correct one.
9.2. Tap the ‘...’ icon for the desired device and select ‘Settings’.
9.3. Tap ‘Wi-Fi’ and then ‘Forget This Network’.
9.4. Once complete, the unit will disconnect with the network. You can follow steps 4 through 8 again to connect your OS-440
to the desired network.
10. If you switch your OS-440 to Wi-Fi Direct by quickly double pressing the source button, the OS-440 will disconnet from
the Internet enabled Wi-Fi network.
Section 2: How to Configure Your OS-440 on Bluetooth
1. To configure your OS-440 for Blutetooth use, press the Source button (refer to page 1, figure 6) on the OS-440 until the
source cycles to Wi-Fi/Bluetooth. The LED indicator for Source will blink blue to initiate “Discovery Mode” and blink until a
device is paired.
2. In your mobile device settings, turn Bluetooth On and select the OS-440 to pair with. Unless previously renamed, the
OS-440 will be named “MSE_AUDIO_OS440”. Once paired, you know your device is connected when the source LED will
be solid blue.
3. You are now ready to play audio through your Bluetooth connected device.