SPEAKER CONNECTIONS
Please refer to the diagram on the following page for speaker connections.
The following instructions apply whether you are using a separate amplifier or Home Theater receiver. For simplicity we will use the term “amplifier”
throughout this manual to mean both. With system power off and your amplifier unplugged, please follow these steps:
Special Note: Observe Speaker Polarity Carefully!
Every cable, speaker and amplifier is clearly marked to show their positive (+) and negative (-) terminals. Amps and speakers may use some
combination of these symbols and/or colors to indicate positive (usually red) and negative (usually black or white) connections. One strand of
your cable will also be ridged and/or marked with a colored line or other indicator on the positive side. For proper polarity and, thus, ideal system
performance, always connect the positive side of the cable to the positive terminals on your speakers and amplifier and the negative side of the
cable to the negative terminals.
Front Speakers: The pair of front speaker connections (left and right) on your amplifier will be labeled “Front” or “Main.” Connect the speaker
cables for your left and right front speakers using these terminals and then connect the cables to the front satellites. Observe positive and negative
polarities.
Center Speaker: The center speaker connections on your amplifier will
be labeled “Center” or “Center Channel.” Connect the speaker cables for
your center channel speaker using these terminals and then connect the
cables to the center speaker. Observe positive and negative polarities.
Surround Speakers: The pair of surround connections (left and right) on
your amplifier will be labeled “Surround.” Connect the speaker cables
for your left and right surround speakers using these terminals and then
connect the cables to surround satellite speakers. Observe positive and
negative polarities.
Rear Speakers (used in a 7.1 or 7.2 system): The pair of rear connections
(left and right) on your amplifier will be labeled “Rear.” Connect the speaker
cables for your left and right rear speakers using these terminals and then
connect the cables to the rear satellite speakers. Observe positive and
negative polarities.
Amplifier Panel
Left
Front
Left
Surr.
Center
Channel
Right
Front
Right
Surr.
SUB OUT
Subwoofer
Left
Front
Center Speaker
Right
Front
Right
Surround
Left
Surround
Line Input
CARING FOR YOUR SPEAKERS
All Phase Technology speakers are finished with a high degree of craftsmanship in either hand polished paint or vinyl laminates. We recommend
using a lint-free rag with a small amount of glass cleaner to maintain the long-lasting beauty of the finish. Avoid products containing silicones, oils,
oil derivatives, or solvents. Enclosures finished in vinyl laminates may be cleaned with a damp cloth as necessary.
MAINTENANCE AND SERVICE
Because of Phase Technology’s uncompromising quality control programs, it’s unlikely that your speakers will ever need service if connected and
used as outlined in this Owners’ Manual. In the unlikely event that a problem does occur, please contact your Phase Technology dealer. Your dealer
has the necessary factory-authorized parts and trained technicians to quickly restore your speaker to its original performance specifications.
WARRANTY
LIMITED WARRANTY
Phase Technology warrants its loudspeakers to be free from defects in material and workmanship for a period of ten (10) years for speaker product
and three (3) years for the electronic components to the original purchaser. Purchase must be made from an authorized Phase Technology dealer.
This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in transit, alterations, unauthorized repairs,
failure to follow instructions, fire, flood or any other cause beyond the reasonable control of Phase Technology. Defects in speaker cabinets or grilles
must be brought to the attention of your dealer immediately after purchase. This warranty will be void if the products’ serial number has been altered
or removed.
To obtain warranty service, defective product must be shipped in its original carton or equivalent together with original invoice or bill of sale, insured
and prepaid to your authorized Phase Technology dealer or the factory when warranty service is requested.
If you choose to return the defective product to the factory you must first call us at 913.663.5600 to obtain a Return Authorization number prior to
shipping. Product repaired under this warranty will be returned to you freight collect.
Specifications
PC 60 CA
Woofer 6.5” Kevlar/glass/fiber/RPF
TM
composite solid piston with NBR surround
Tweeter / Midrange 1” Patented woven synthetic soft dome
Impedance 4 Ω
Frequency Response 60 Hz - 20 kHz
Sensitivity 88 dB
Recommended Amp Power 25 - 150 W
Dimensions* Height: 13.25” Width: 8.625” Depth: 8.25”*
Finish Oak, Black Oak
Optional Accessories N/A
*Add 1” to depth for connection.
R
