background image

8

[WARRANTY]

LIMITED WARRANTY

: Phase Technology warrants its 

loudspeakers to be free from defects in material and 
workmanship for a period of ten (10) years for speaker 
product, limited lifetime for CI speakers, and three (3) years 
for the electronic components to the original purchaser. 
Purchase must be made from an authorized Phase 
Technology dealer.

This warranty does not cover service or parts to repair 
damage caused by misuse, abuse, damage while in 
transit, alterations, unauthorized repairs, failure to follow 
instructions, fire, flood or any other cause beyond the 
reasonable control of Phase Technology. Defects in speaker 
cabinets or grilles must be brought to the attention of your 
dealer immediately after purchase. This warranty will be void 
if the products’ serial number has been altered or removed.

Should your Phase Technology product require service, 
please call the MSE Audio customer service department for 
a return authorization. All merchandise returned to Phase 
Technology without prior authorization will be refused. For 
your return authorization number, please call 855.663.5600 
or email sales@mseaudio.com.

[SPECIFICATIONS]

DESCRIPTION

TWEETER

SFE

WOOFER

FREQUENCY

SENSITIVITY

IMPEDANCE

MAXIMUM POWER

DIMENSIONS

WEIGHT

FINISH OPTIONS

GRILLE

2-way ultra-thin sounbar with EVT

(3) .75” silk/synthetic blend soft dome

(2) 1” aluminum wide range driver

(6) 3” polypropylene ultra-long throw

75 Hz - 20 kHz

90 dB

8 Ohms

100 Watts

6.75” H x 43” W x 1.5” D

12 lbs.

Brushed Black Aluminum

Pressure Fit Powder-Coated Aluminum

TEATRO

®

 TSB3.0 SOUNDBAR

Copyright © 2014 MS Electronics, LLC. All rights reserved. MSE Audio, Phase Technology and PhaseTech are registered trademarks and 

“Speakers for your Life” is a trademark of MSE Audio, Overland Park, Kansas USA. Phase Technology is part of MSE Audio

®

. www.phasetech.com. 

Summary of Contents for TEATRO TSB3.0










Reviews: