Phase One iXG Camera
Sensor Cleaning Procedure
4
Dismounting a Lens from the iXG Camera
Lenses on the iXG series of cameras are easily dismounted.
NOTE
: Ensure that you only dismount lenses in a clean environment. Place the detached lens
on a soft cloth on the table to avoid scratching the lens.
To dismount the lens:
Release the lens' locking levers.
Remove the lens by pulling it gently away from the camera.
NOTE
: If no lens is being mounted, ensure that the camera is stored in a way that protects it
from dust, moisture and other damage. When the iXG camera is mounted facing down, always
make sure (double check) that the lens is well secured by having the lens locking levers
engaged.
Cover the front of the camera to prevent damage to the sensor.
With a 2.5mm hex screwdriver, release the four camera module screws and lift
the entire camera body, place it on a clean surface.
Note
: Make sure that the sensor module is well protected.
