background image

 

22

 

   DISPOSAL OF UNIT 

 

(English) 

Information on Disposal for Users of Waste Electrical & Electronic Equipment (private 

households)

 

 
This symbol on the products and/or accompanying documents means that used electrical 
and electronic products should not be mixed with general household waste. 
For proper treatment, recovery and recycling, please take these products to designated 
collection points, where they will be accepted on a free of charge basis. Alternatively, in 
some countries you may be able to return your products to your local retailer upon the 
purchase of an equivalent new product. 
 Disposing of this product correctly will help to save valuable resources and prevent any 
potential negative effects on human health and the environment which could otherwise arise 

from inappropriate waste handling.  Please contact your local authority for further details of your nearest 
designated collection point. 
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. 
 

For business users in the European Union 

 

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further 
information. 

 

Information on Disposal in other Countries outside the European Union 

 

This symbol is only valid in the European Union. 
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of 
disposal. 

 
 
(German) 

Benutzerinformationen zur Entsorgung von elektrischen und elektronischen Geräten 

(private Haushalte)

 

 
Dieses Symbol auf Produkten und/oder begleitenden Dokumenten bedeutet, dass 
verbrauchte elektrische und elektronische Produkte nicht mit gewöhnlichem Haushaltsabfall 
vermischt werden sollen. 
Bringen Sie zur ordnungsgemäßen Behandlung, Rückgewinnung und Recycling diese 
Produkte zu den entsprechenden Sammelstellen, wo sie ohne Gebühren 
entgegengenommen werden. In einigen Ländern kann es auch möglich sein, diese Produkte 
beim Kauf eines entsprechenden neuen Produkts bei Ihrem örtlichen Einzelhändler 
abzugeben. 

Die ordnungsgemäße Entsorgung dieses Produkts dient dem Umweltschutz und verhindert mögliche schädliche 
Auswirkungen auf Mensch und Umgebung, die aus einer unsachgemäßen Handhabung von Abfall entstehen 
können. Genauere Informationen zur nächstgelegenen Sammelstelle erhalten Sie bei Ihrer Gemeindeverwaltung. 
In Übereinstimmung mit der Landesgesetzgebung können für die unsachgemäße Entsorgung dieser Art von Abfall 
Strafgebühren erhoben werden. 
 

Für Geschäftskunden in der Europäischen Union 

 
Bitte treten Sie mit Ihrem Händler oder Lieferanten in Kontakt, wenn Sie elektrische und elektronische Geräte 
entsorgen möchten. Er hält weitere Informationen für sie bereit. 
 

Informationen zur Entsorgung in anderen Ländern außerhalb der Europäischen Union 

 
Dieses Symbol ist nur in der Europäischen Union gültig. 
Bitte treten Sie mit Ihrer Gemeindeverwaltung oder Ihrem Händler in Kontakt, wenn Sie dieses Produkt entsorgen 
möchten, und fragen Sie nach einer Entsorgungsmöglichkeit. 

Summary of Contents for MDF-MU300H





































Reviews: