28
TEMPERATURE RECORDER (OPTION)
Setting of MTR-G85C
If the warning is required for the internal temperature record or the interior temperature deviates from the
target temperature, an optional temperature recorder (MTR-G85C) is available. Install the recorder
properly as described below.
Loading the ink pen:
1.
Turn the power switch off for temperature recorder.
2.
Slightly raise the end of the pen lifter and remove from the pen
lifter stopper. Then rotate clockwise as shown in Fig. 1.
3.
Remove the ink pen from the bag and remove its cap. The cap
can be conveniently kept on the pen cap holder located at the upper
left corner.
4.
Press both sides of the pen arm as indicated by the arrows to
open the head clamp at A and B. (See to Fig. 2 illustration 1)
5.
Position the ink pen so that the guide pins fit into the guide holes
on the pen arm. (See to Fig. 2 illustration 2)
6.
Press the two sides of the head clamp as indicated by the arrows
to secure the ink pen. (See to Fig. 2 illustration 3) From the side
view, the cartridge should fit perfectly on the arm. Confirm that the
pen arm is attached to both sides of the ink pen.
7.
After loading the ink pen, return the pen lifter to the original
position. Confirm that the pen lifter has securely entered the pen
lifter stopper.
8.
Turn the power switch on for temperature recorder.
Fig. 1
Fig. 2
Ink pen
Ink pen
Pen arm
1
2
3
B
A
A
Open cover
latch
Key lock
Pen arm
Pen lifter
Ink pen
Chart guides
Back-up battery
Power switch
Chart hub cover
Recording
paper
Pilot lamp
Zero adjustment screw
Fast feed button
Paper speed selector
Pen lifter stopper
Pen cap holder
Summary of Contents for MDF-MU300H
Page 2: ......
