background image

 

38

 

 
 

 

CAUTION

 

Please fill in this form before servicing.   

Hand over this form to the service engineer to keep for his and your safety.

 

 
 

Safety check sheet 

 

 

1. Freezer contents : 

Risk of infection: 
Risk of toxicity: 
Risk from radioactive sources: 

 

(List all potentially hazardous materials that have been stored in this unit.) 
Notes :   
 
 
 

2.

 Contamination

 of the unit 

Unit interior 
No contamination 
Decontaminated 
Contaminated 
Others: 
 
 
 
 

3. Instructions for safe repair/maintenance/disposal of the unit 

a) The unit is safe to work on 
b) There is some danger (see below) 
Procedure to be adhered to in order to reduce safety risk indicated in b) below. 
 
 
 

Date : 
Signature : 

Address, Division :

 

Telephone :   
 

Product name:   

Model:   

 

Serial number: 

 

Date of installation: 

    Biomedical Freezer

 

MDF-

 

   

 

 

Please decontaminate the unit yourself before calling the service engineer. 
 

Yes       

No

 

Yes       

No

 

Yes       

No

 

 

Yes       

No

 

Yes       

No

 

Yes       

No

 

 

Yes       

No

 

Yes       

No

 

Summary of Contents for MDF-MU539D









































Reviews: