4
The Network Camera provides GUI ( Web based, Graphical User Interface ) for machine
management and maintenance.
When you installed your IP camera over your network environment, to start Network Camera
web configuration, you must have the web browsers installed on computer for web
management.
-
Microsoft internet Explorer 5.0 or higher with Java support
Default LAN interface IP address of Network Camera is
192.168.0.20
. You may now open your
web browser, and key in
http://192.168.0.20
in the address bar of you web browser to logon
Network Camera’s web configuration page.
The Network Camera will prompt for User Name and Password. For the first time, please enter :
admin
as username to continue machine Web Management.
If difficulty is met, please refer to the following steps to establish the connection:
-
Your PC can establish a physical connection to the Network Camera. The PC and the
Network Camera must be directly connected (using the LAN port on the Network Camera.)
or on the same LAN segment. That is the PC must be configured to an IP address and
subnet mask in 192.168.0 x segment. For example: IP: 192.168.0.2, subnet mask :
255.255.255.0.
-
The Network Camera must be installed and powered NO.
Summary of Contents for MJCAS-210IR
Page 1: ...1...
