B
A
black handle
retention point
C
Figure 5
Figure 4
Figure 3
3.
5.
4.
Place the gas cylinder into the cylinder holder. Secure the cylinder by tightening clockwise the retention point found on the cylinder
holder, so that the cylinder cannot move from side to side or fall down. Connect the regulator, screw the black handle clockwise to
tighten, turn the black handle counterclockwise to remove. The hose must not turn upside. The knob on the control panel is turned
all the way to the “OFF” position when the fire pit is NOT in use (See Figure 3).
Cover the fire pit with the outdoor weather cover (C) when not in use to protect it from the elements or when fire pit is cool
COMPLETELY after the use, (See Figure 5).
Attach the door (B) with fire table (A) tenderly, (See Figure 4).
6
ASSEMBLY INSTRUCTIONS
LIFE GETS BETTER WITH PHI VILLA
