150Mbps Wireless N ADSL2/2+ Modem Router
www.phicomm.com
40
Chapter 4: Software Configuration
Filter
The filtering feature includes IP/MAC Filter, Application Filter and URL Filter. The feature makes it
possible for administrators to control user's access to internet, protect the networks.
Filter Type Selection: Select the filter type for the configuration below.
Rule Type Selection: White list and black list.
IP/MAC Filter Rule Index: Select the Set index for the IP Filter entry. This index can match with
sixteen IP / MAC Filter Rule Indexes.
Active: Select Yes to make the rule to take effect.
Interface: Select the interface for the entry.
Direction:
Select the direction for this IP/Mac Filter rule. There are three filtering directions: Both,
Incoming, Outgoing.
Rule Type: Choose to set the filter rules according to IP or Mac.
Source IP address & Subnet Mask & Port Number:
Enter the source IP address for the rule. You
can enter 0.0.0.0, it means that all IP addresses are controlled by the rule.
Destination IP Address & Subnet Mask & Port Number
：
Enter the destination IP address for the
rule. You can enter 0.0.0.0, it means that all IP addresses are controlled by the rule. The set of
Subnet Mask and Port Number are same as Source IP Address.
