300Mbps Wireless N USB Adapter
www.phicomm.com
16
Appendix A: Troubleshooting
Look under Device Status to check that the device is working properly.
2.
The computer does not recognize the wireless network Adapter.
Make sure that the Wireless Network Adapter is properly seated in the computer’s USB port.
If Windows
does not detect the hardware upon insertion of the adapter, make sure to
completely remove drivers that were previously loaded.
3.
Cannot connect to any access points.
Verify that the wireless network adapter is in infrastructure mode.
Verify that the SSID of your wireless network adapter is set to the same SSID of your access
point.
Verify that the encryption type is the same as that of an access point. If you enabled WEP
encryption, you must also set the same WEP Keys on both sides.
4.
The network is slow /having problem when transferring large files.
Move closer to the place where access point is located.
There could be too much people using the same radio channel. Ask the owner of the access
point to change the channel number.
