3/8/2018
40 CPR Quadrature Encoder - ENC4109_0 at Phidgets
https://www.phidgets.com/?tier=3&catid=64&pcid=57&prodid=1016
2/3
are two
orientations
possible-
use
whichever is
more
convenient
for motor
wiring.
Place the
screws in
the two
holes in the
PCB and
screw until
the base
and PCB
are firmly
attached,
being
careful not
to over-
tighten and
damage the
pieces.
Take the
plastic
encoder
wheel and
place it on
the shaft
with the
comb-
shaped
edge facing
the motor.
Slowly slide
the wheel
onto the
shaft until
the combs
are in front
of the
optical
sensor on
the PCB. Be
careful not
to push so
far that the
wheel is
contacting
components
on the PCB.
