Philco PCF 3012 M, User Manual

EN - 5

 06/2015

Copyright © 2015, Fast ČR, a. s.

PART 2: INSTALLATION 

Transport and unpacking

If the appliance is transported in a horizontal position the oil from the compressor may leak into the cooling 
circuit. For this reason, allow the appliance to rest in a vertical position for 12 hours before turning it on, so that 
the oil fl ows back into the compressor.
Remove the external packaging, remove the protective plastic fi lm from the surface of the appliance (if used) 
and clean the external parts of the appliance with an agent designed for this purpose. Do not use steel wool or 
any coarse agents, which could irreparably damage the surface of the appliance. Carefully remove all papers 
and adhesive tape from the appliance, door and other parts packed in polystyrene. Remove documents and 
accessories from inside the appliance.
The packaging material is recyclable and is marked with a recycling symbol. For disposal follow the local 
regulations. Packaging materials (plastic bags, polystyrene parts, etc.) must be kept out of the reach of children, 
because they present a possible source of danger.
Carefully inspect the appliance. If you discover any defects, stop the installation and contact the vendor.

Operating conditions

The proper operation of the appliance, the freezing temperatures are guaranteed only when the following 
conditions are met:



The temperature in the room where the appliance is located conforms to the climate class stated on the 
appliance's rating label.



Maximum ambient relative humidity: 90%.



The appliance must be placed at a suffi

    cient distance from heat sources (e.g. baking ovens, central heating, 

direct sunlight, etc.).



The appliance must be located in such a location that it is protected against the eff ects of weather.



Regular maintenance is performed according to the instructions in this user's manual.



The ventilation openings in the cover of the appliance must not be covered by anything.



Correct installation (e.g. levelling, the capacity of the system correspond to the specifi cations on the rating 
label of the appliance.)

Table – Climatic class

Climatic class

Ambient temperature

SN

+10°C to +32°C

N

+16°C to +32°C

ST

+16°C to +38°C

T

+16°C to +43°C