Copyright © 2020, Fast ČR, a. s.
Revision 12/2021
EN - 19
11. Half Load Indicator
Select the Half Load function to choose which area
of the dishwasher contains dishes to be washed.
You can select both baskets, the upper basket only,
or the lower basket only. Press the button until the
symbol corresponding to the basket containing
the dishes to be washed illuminates. The Half Load
Indicator will illuminate while this function is in
operation. Dishes placed in other areas will not be
washed.
12. Extra Hygiene Indicator
Select the Extra Hygiene function to increase
the wash temperature, for a maximum hygiene
washing operation. The Extra Hygiene Indicator will
illuminate.
13. Extra Rinse option
If Extra Rinse option is selected, washing-rinsing
steps will be added into the selected program, so
you can ensure that your dishes will be extracted
cleaner and glosser.
14. Extra Drying Indicator
If Extra Drying option is selected, extra heating
and drying steps will be added into the selected
program, so you can ensure that your dishes will be
extracted dryer.
15. Washing Step Indicators
The display will show the indicator corresponding to
the status of the programme in operation. While the
Drying indicator is on, the machine will remain silent
with respect to the programme you have selected
for 15 to 100 minutes.
* Wash
* Rinse
* Dry
* End
NOTE:
Child lock is activated/deactivated by pressing
select button (7) for about 3 seconds. When it is
activated, all leds blink and “CL” is shown on Remaning
Time Indicator (4) once. When it is deactivated, all
lamps and “CL” blink twice.
NOTE:
If you switch the machine to off position after
selecting the delay time and the programme has
started, the delayed time is cancelled.
NOTE:
To save any program as favourite program,
press program selection (2) and delay (3) buttons
at the same time. To select favourite program, press
program selection button (2) for 3 seconds.
Changing a programme
If you would like to change the programme when
the machine is already running.
Press the Start/Pause
button.
After the programme stops, select
your desired programme by pressing
Program Selection button.
Start newly selected programme by
pressing the Start/Pause button.
The new programme will resume
the course of the old programme.
