EN - 18
Copyright © 2016, Fast ČR, a. s.
02/2016
To cancel "3in1" function:
To cancel 3in1 washing cycle by pressing the function alternative button or follow the "change the
programme" instructions.
If you decide to switch to the use of a standard detergent system we advise that you:
1.
Refill both the salt and rinse aid compartments.
2.
Switch the water hardness setting to the highest possible position and run for three Eco cycles without
load.
3.
Readjust the water hardness setting again according to the conditions for your region (For more
information please refer to your instruction manual)
.
NOTE:
3in1washing cycle is additional function, they must be used with other programme (Intensive, Eco and
Light).
PART 5: LOADING THE DISHWASHER BASKETS
For best performance of the dishwasher, follow these loading guidelines. Features and appearance of baskets
and silverware baskets may vary from your model.
Attention before or after Loading the Dishwasher Baskets
Scrape off any large amounts of leftover food. It is not necessary to rinse the dishes under running water.
Place objects in the dishwasher in the following way:
1.
Items such as cups, glasses, pots/pans, etc. are stood upside down.
2.
Curve items, or those with recesses, should be at a slant so that water can run off.
3.
They are stacked securely and can not tip over.
4.
They do not prevent the spray arms from rotating while washing takes place.
Very small items should not be washed in the dishwasher as they could easily fall out of the baskets.
Removing the Dishes
To prevent water dripping from the upper basket into the lower basket, we recommend that you empty the
lower basket first and then the upper basket.