EN - 29
Copyright © 2016, Fast ČR, a. s.
02/2016
Attention:
The installation of the pipes and electrical equipments should be done by professionals.
Warning!
Electrical Shock Hazard!
Disconnect electrical power before installing dishwasher.
Failure to do so can result in death or electrical shock.
PART 8: TROUBLESHOOTING TIPS
Error codes
When some malfunctions happen, the appliance will display error codes to warn you.
Codes
Meanings
Possible Causes
E1
Door open
The door is opened when the dishwasher is operating
E2
Water inlet
Water inlet malfunction
E3
Water drainage
Water drainage malfunction
E4
Temperature sensor
Temperature sensor malfunction
E5
Overflow/leakage
Overflow occurs/Water leakage occurs
E6
Water leakage
Water leakage occurs
E7
Heating element
Abnormal heating
E8
Water diversion system
Water diversion system malfunction
Warning!
If overflow occurs, turn off the main water supply before calling a service. If there is water in the
base pan because of an overfill or small leak, the water should be removed before restarting the
dishwasher.
Before Calling for Service
Reviewing the charts on the following pages may make you be free of calling for service.
Problem
Possible Causes
What To Do
Dishwasher
doesn't run
Fuse blown, or the circuit
breaker acted
Replace fuse or reset circuit breaker. Remove any other
appliances sharing the same circuit with the dishwasher.
Power supply is not
turned on
Make sure the dishwasher is turned on and the door is
closed securely. Make sure the power cord is properly
plugged into the wall socket.
Water pressure is low
Check that the water supply is connected properly and the
water is turned on.
Drain pump
doesn't stop
Overflow
The system is designed to detect an overflow. When it does,
it shuts off the circulation pump and turns on the drain
pump.