Copyright © 2020, Fast ČR, a. s.
Revision 12/2021
EN - 12
If required you may lay the refrigerator on its back in order to gain access to the base, you should
rest it on soft foam packaging or similar material to avoid damaging the backboard of the
refrigerator. To reverse the door, the following steps are generally recommended.
1. Use a putty knife or thin-blade screwdriver to prize the screw hole cover which is at the top left corner of
the refrigerator, and the upper hinge cover which is at the top right corner of the refrigerator.
screw hole cover
upper hinge
cover (right)
2. Unscrew the special flange selftapping screws which are used for fixing the right upper hinge part by a 8
mm socket driver or a spanner (please support the upper door with your hand when doing it).
right upper hinge part
special flange
selftapping screws
3. Remove the upper hinge axis, transfer it to reversed side and tighten securely, then put it in a safe place.
4. Remove the door from the lower hinge.
When removing the door,watch for washer(s) between the lower hinge and the bottom of the
lower door that may stick to the door.
Do not lose.
