Copyright © 2020, Fast ČR, a. s.
Revision 12/2021
EN - 23
Problem
Possible causes & Solutions
A layer of frost occurs
in the compartment.
Check that the air outlets are not blocked by food and ensure food is placed
within the appliance to allow sufficient ventilation. Ensure that door is fully
closed. To remove the frost, please refer to the “Cleaning and care” chapter.
Temperature inside is
too warm.
You may have left the doors open too long or too frequently; or the doors
are kept open by some obstacle; or the appliance is located with insufficient
clearance at the sides, back and top.
Temperature inside is
too cold.
Increase the temperature by following the “Display controls” chapter.
Doors can't be closed
easily.
Check whether the top of the refrigerator is tilted back by 10 - 15 mm to allow
the doors to self close, or if something inside is preventing the doors from
closing.
Water drips on the
floor.
The water pan (located at the rear bottom of the cabinet) may not be properly
leveled, or the draining spout(located underneath the top of the compressor
depot)may not be properly positioned to direct water into this pan ,or the
waterspout is blocked. You may need to pull the refrigerator away from the wall
to check the pan and spout.
