EN - 20
10/2014
Copyright © 2014, Fast ČR, a. s.
Problem
Possible cause & Solution
A layer of frost occurs
In the compartment
Check that the air outlets are not blocked by food and ensure food is placed
within the appliance to allow suffi
cient ventilation. Ensure that door is fully
closed. To remove the frost, please refer to cleaning and care chapter.
Temperature Inside
Is too warm
You may have left the doors open too long or too frequently; or the doors
are kept open by some obstacle; or the appliance is located with insuffi
cient
clearance at the sides, back and top.
Temperature Inside
is too cold
Increase the temperature by following the “Display controls” chapter.
Doors can’t be closed
easily
Check whether the top of the refrigerator is tilted back by 10-15mm to allow the
doors to self close, or if something inside is preventing the doors from closing.
Water drips on the fl oor The water pan (located at the rear bottom of the cabinet) may not be properly
leveled, or the draining spout (located underneath the top of the compressor
depot) may not be properly positioned to direct water into this pan, or the water
spout is blocked. You may need to pull the refrigerator away from the wall to
check the pan and spout.
The light is not working •
The LED light may be damaged. Consult a qualifi ed, registered electrician
in this case.
•
The control system has disabled the lights due to the door being kept open
too long, close and reopens the door to reactivate the lights.
