EN - 7
10/2014
Copyright © 2014, Fast ČR, a. s.
Care and cleaning
• Before maintenance, switch off the appliance and disconnect the
mains plug from the mains socket.
• Do not clean the appliance with metal objects, steam cleaner, ethereal
oils, organic solvents or abrasive cleansers.
• Do not use sharp objects to remove frost from the appliance. Use
a plastic scraper.
Installation Important!
• For electrical connection carefully, follow the instructions given in this
manual.
• Unpack the appliance and check if there are damages on it. Do not
connect the appliance if it is damaged. Report possible damages
immediately to the place you bought it. In this case retain packing.
• It is advisable to wait at least four hours before connecting the appliance
to allow the oil to fl ow back in the compressor.
• Adequate air circulation should be around the appliance, lacking
this leads to overheating. To achieve suffi
cient ventilation, follow the
instructions relevant to installation.
• Wherever possible the back of the product should be against a wall
to avoid touching or catching warm parts (compressor, condenser) to
prevent the risk of a fi re, follow the instructions relevant to installation.
• The appliance must not be locate close to radiators or cookers.
• Make sure that the mains plug is accessible after the installation of the
appliance.
Service
Any electrical work required to do the servicing of the appliance should
be carried out by qualifi ed electrician or competent person.
This product must be serviced by an authorized Service Center, and only
genuine spare parts must be used.
1) lf the appliance is Frost Free.
2) lf the appliance contains freezer compartment.
