EN - 11
12/2013
Copyright © 2013, Fast ČR, a. s.
3. Disconnect electrical connector
1
and electrical connector
2
and then remove part
3
.
4. Remove
screws
1
, release cables
2
and remove part
3
.
Special self-tapping
screws
Grounding wire
Top hinge part
NOTE:
During step
4
, hold the door with your hand so that it does not fall off .
5. Remove the door and place it on a soft surface with the front part facing upwards. Lift up part
1
and part
4
, then loosen screws
2
as shown in the picture. Change the handle
3
to the left side, then insert screw
2
, part
1
and part
4
afterwards. Loosen screws
7
, remove part
6
and part
5
, turn part
6
and then
install part
5
and part
6
on the right side using screws
7
.