EN - 15
12/2013
Copyright © 2013, Fast ČR, a. s.
12. Connect the power supply connector
1
according to the connection in step 3 and then install part
2
(it
is found in the plastic bag).
Top hinge cover (right)
13. Turn part
1
by 180° and install it in the left corner of the door, then secure part
2
. (both were removed
in step 2.)
14. Disconnect the connecting cable from the connector (part
3
in step 3) and install it on to the second
connector, which you will use (it is marked with the letter "L" and is located in the plastic bag). Place the
removed connector into the plastic bag.
NOTE:
Check that the coupling of the connecting cable fi ts properly into the connector.