Copyright © 2019, Fast ČR, a. s.
Revision 09/2019
EN - 11
PART 3: INSTALLATION INSTRUCTIONS
Please Read the Manual Carefully Before Installation.
Screw
Trim-kit plastic cover
Please note
Electrical connection
The oven is fitted with a plug and must only be connected to a properly installed earthed socket. In
accordance with the appropriate regulations, the socket must only be installed and the connecting cable
must only be replaced by a qualified electrician.
If the plug is no longer accessible following installation, an all-pole isolating switch must be present on the
installation side with a contact gap of at least 3 mm.