background image

EN - 3

Copyright © 2016, Fast ČR, a. s. 

  07/2016

SAFETY HINTS

  Do not use the oven unless you are wearing something on your feet. Do not touch the oven with wet or 

damp hands or feet.

  For oven: Oven door should not be opened often during the cooking period.

  The appliance must be installed by an authorized technician and put into use. The producer is not 

responsible for any damage that might be caused by defective placement, and installation by unauthorized 
personnel.

  When the door or drawer of oven is open do not leave anything on it, you may unbalance your appliance 

or break the door.

  Some parts of appliance may keep its heat for a long time; it is required to wait for it to cool down before 

touching onto the points that are exposed to the heat directly.

  If you will not use the appliance for a long time, it is advised to plug it off .

FITTING THE OVEN INTO THE KITCHEN UNIT

Fit the oven into the space provided in the kitchen unit; it may be fi tted underneath a work top or into an 
upright cupboard. Fix the oven in position by screwing into place, using the two fi xing holes in the frame. To lo-
cate the fi xing holes, open the oven door and look inside. To allow adequate ventilation, the measurements 
and distances adhered to when fi xing the oven.

IMPORTANT

If the oven is to work properly, the kitchen housing must be suitable. The panels of the kitchen unit that are 
next to the oven must be made of a heat resistant material. Ensure that the glues of units that are made of 
veneered wood can with stand temperatures of at least 120 °C. Plastics or glues that cannot withstand such 
temperatures will melt and deform the unit, once the oven has been lodged inside the units, electrical parts 
must be completely insulated. This is a legal safety requirement. All guards must be fi rmly fi xed into place so 
that it is impossible to remove them without using special tools. Remove the back of the kitchen unit to ensure 
an adequate current of air circulates around the oven. The hob must have a rear gap of at least 45 mm.

DECLARATION OF COMPLIANCE

When you have unpacked the oven, make sure that it has not been damaged in any way. If you have any 
doubts at all, do not use it: contact a professionally qualifi ed person. Keep packing materials such as plastic 
bags, polystyrene, or nails out of the reach of children because these are dangerous to children.

Summary of Contents for POB 16 XP


















Reviews: