5
AM or FM no sound.
Unit not set to AM or FM band.
Volume at minimum.
Slide the band selector to AM or FM
position.
Increase Volume.
SPECIFICATIONS
POWER SUPPLY
FREQUENCY RANGE
BLUETOOTH VERSION
ACCESSORIES
AC - 120V~ 60Hz,
5
W
DC - 3 x1.5V
type R14/ UM-2/ “C” size batteries (not provided)
FM 8
7.5
-108 MHz
AM 5
20
-17
10
kHz
Version 5.0
1 X Owner's Manual
1 X AC/AC Power Adapter
TROUBLESHOOTING GUIDE
Symptom
Possible Cause
Solution
Noise or sound
distorted on AM or
FM broadcast.
Station not tuned properly for AM or FM.
FM: Telescopic antenna is not extended.
AM: The bar antenna is not positioned correctly.
Retune the AM or FM broadcast station.
Fully extend the FM telescopic antenna.
Reposition the unit until the best reception
is obtained.
BLUETOOTH OPERATION
If the unit has never been paired with a Bluetooth device before, you need to follow the
pairing instructions below to link the PRR1005BT with your Bluetooth device.
1.
Use the Mode Selector to choose BT into Bluetooth Mode.
2.
Toggle the Power ON/OFF Switch to ON.
3.
The unit will goes into Pairing/Discoverable mode.
4.
Turn on the Bluetooth function of your Bluetooth device and enable the search or scan
function to find the unit.
5.
Select "PRR1005BT" from the device list when it appears on your device screen. If required,
enter the pass code "0000" or "1234" to pair (link) the unit with your device.
6.
After successfully pairing (linking) the Bluetooth enabled device a short beep will heard.
7.
Adjust the volume level to your desire volume level.
Note: If you can't pair the unit with your Bluetooth enabled device, you can try to turn Off & On the
power of your unit to solve the problem.
Summary of Contents for PRR1005BT
Page 1: ......
