Copyright © 2019, Fast ČR, a. s.
Revision 09/2021
EN - 23
Problem
Possible cause
Solution
Appliance does not
work.
Appliance is not switched on.
Switch on the appliance.
Mains plug is not plugged in or is
loose.
Insert mains plug.
Fuse has blown or is defective.
Check fuse, replace if necessary.
Socket is defective.
Mains malfunctions are to be
corrected bv an electrician.
The food is too warm.
Temperature is not properly adjusted.
Pleaselook in the“initial Start Up”
section.
Door was open for an extended
period.
Open the door only as long as
necessary.
A large quantity ofwarm food was
placed in the appliance within the last
24 hours.
Turn the temperature regulation to a
colder setting temporarily.
The appliance is neara heat source.
Please look in the “installation
location” section.
Heavy build-up of frost,
possibly also on the door
seal.
Door seal is not air-tight (possibly
after reversing the door).
Carefully warm the leaking sections
of the door seal with a hair dryer (on a
cool setting). At the same time shape
the warmed door seal by hand such
that it sits correctly.
Unusual noises.
Appliance is not level.
Readjust the feet.
The appliance is touching the wall or
other objects.
Move the appliance slightly.
A component, e.g. a pipe, on the rear
of the appliance is touching another
part of the appliance or the wall.
If necessary, carefully bend the
component out of the way.
The compressor does
not start immediately
after changing the
temperature setting.
This is normal, no error has occurred.
The compressor starts after a period
of time.
Water on the floor or
storage shelves.
Waterdrain hole is blocked.
See the “cleaning and care” section.
Summary of Contents for PTB 91 FW
