Copyright © 2019, Fast ČR, a. s.
Revision 09/2021
EN - 15
PART 4: OPERATION
Starting up and temperature regulation
Insert the plug of the connection lead into the plug socket with protective earth contact. The temperature
selector knob is located on the side of the freezercompartment.
Setting “0 ” means
Turning the temperature control to “0” position stops the cooling cycle, but does not shut off the power to
the refrigerator.
Turning clockwise in direction Refrigerating unit on, the latter then operating automatically. If the unit is
unplugged, power lost, or turned off, you must wait 3to5 minutes before restarting the unit. If you attempt to
restart before this time delay, the refrigerator will not start.
Setting “8”(end-stop) means:
Lowest temperature, coldest setting.
Important!
Normally we advise you select setting of 3 or 4, if you want the temperature warmer
or colder please turn the knob to lower orhigher setting accordingly.
When you turn the knob to lower which can lead to the more energy efficiency. Otherwise, it would result the
energyconsuming.
Important!
High ambient temperatures(e.g.onhot summer days) and a colder setting (position 6
to 8) on the temperature regulator can cause the compressor to run continuously or
even non-stop!
Reason: when the ambient temperature is high, the compressor must run continuously to maintain the low
temperature in the appliance.
8
7
6
5
4
3
2
1
0
Remove and install the door shelf
Warning: The door shelf must not removed and installed by the user! If the door shelf is damaged .contact the
customer helpline for assistance .To replace the door shelf, the below steps can be followed:
Summary of Contents for PTB 91 FW
