Copyright © 2019, Fast ČR, a. s.
Revision 09/2021
EN - 21
PART 7: REVERSING THE DOOR
The side at which the door opens can be changed from the right side (as supplied) to the left side, if the
installation site requires.
Tools you will need:
1. 8mm socket driver.
2. Cross-shaped screwdriver.
3. Putty knife orthin-blade screwdriver.
Before you start lay the refrigerator on it’s back in order to gain access to the base, you should rest it on soft
foam packaging or similar material to avoid damaging the cooling pipes at the rear of the refrigerator.
1. Remove the upper hinge core, transfer it to left side and tighten securely, then put it in a safe place.
2. Remove both adjustable feet > the bottom hinge bracket and the rubber supporting pad by unscrewing
the bolts, then fit them on by the following pictures.
Summary of Contents for PTB 91 FW
