background image

Picture Frame Indoor Amplified TV Aerial

USER GUIDE

Aerial Assembly / Installation

27773R

LED Power

Indicator

 

High performance compact aerial

 

Can be wall mounted or free standing 

 

Ideal for receiving strong digital and analogue TV signals

 

Choose one of your favourite photos to fit in the frame

RF Aerial Flylead - not supplied  
(only use if analogue signal required*)

SCART Lead

(not supplied)

Freeview™

Box/PVR

TV

PSU - Plugs into 

Mains Socket

Coax Power Adaptor - Plugs  

into ANT. IN (Plugs directly  

into TV ANT. IN if TV has  

built-in Freeview™ receiver)

Aerial Coax Lead - Plugs 

into Coax Power Adaptor

Picture Frame Digital Aerial

Your picture frame aerial  comes with two clip-on  brackets attached to the back of the aerial. In this 

position these can be used for wall mounting. The brackets can alternatively be unclipped from the   

back of the aerial and attached as feet to the bottom of the aerial, as shown below.

Wall Mounting

If you decide to wall mount your aerial.

Choose fixings - screws, wall plugs etc. (not  

supplied) suitable for attaching your aerial to  

the surface you have chosen.

1.  Follow the connection instructions below  

  and place the aerial in the chosen position  

  to check if reception is good in this position.

2. Attach the two brackets to the wall 170mm 

  apart with the screw holes facing down.

  align the sockets on the back of the aerial 

  with the two brackets and clip the aerial into position.

Clip

If you have a set top Freeview™ receiver, VCR or PVR the aerial connection will be to the ANT. IN 

coaxial socket of the device which will then be connected to your TV (usually via a SCART lead).  

If you have a TV with a built-in Freeview™ receiver the connection will be to the ANT. IN coaxial 

socket on your TV.

1. Switch off your set top

  box/TV power.

2. Connect the 

Aerial Coax

  Lead

 from your aerial into

  the 

Coax Power Adaptor

.

 3. Plug the 

Coax Power 

  Adaptor 

into the aerial 

  (ANT. IN) socket on your 

  set top box/TV.

4. Plug the PSU into a  mains socket. 

5. Switch on your PSU, set top box  

  and TV. 

6. Adjust the position of your aerial 

   for optimum signal reception.

Aerial Connection

*Careline calls are charged at £1 per minute from a BT landline. Call charges from other networks may vary.

Philex Customer Careline  08457 573 479

Reviews: