1. Power connection
Connect the AC adaptor to the DC6V jack at the back of the aerial and
plug the AC adaptor into a standard mains outlet.
2. If your TV has a built-in digital tuner, connect your aerial to the
RF input on your TV using the coax cable supplied.
3. If you have a separate digital set top box connect your aerial to the
RF input on your set-top box. Connect a 2nd coax cable (not supplied)
from the RF output on your set-top box to the aerial input on your
television. Alternatively, connect a SCART cable (not supplied) from
the SCART output on your set-top box to your television.
4. Aerial adjustment
For Digital TV & FM / DAB reception, try positioning the aerial facing
in different directions until you receive a clear signal to your
TV or radio
5. To switch to an alternative RF source connected via the RF IN
coaxial socket simply switch off the gain control.
Curved Edge Indoor TV Aerial
USER GUIDE
Setting up your aerial
27798RG
Philex Customer Careline: 08457 573 479
Ready
Introduction
• 4G Ready - built-in filter removes interference and channel loss caused by 4G mobile
phone signals
• Stylish compact flat-panel design
• For reception of digital TV (DVB-T) and FM / DAB radio programs
• Receives both horizontal and vertical polarized signals
• Wide band amplifier for improved picture and sound reception
• AC/DC 6V 50mA Power adaptor included
• Power-on indicator
