The RC027 remote has been designed as a direct
replacement for existing digital satellite receiver remote
controls (eg Sky™ and Sky+™)*. All functions are the same
and the layout mirrors that of original remotes to make life
as easy as possible for the user. The RC027 is fully
preprogrammed to operate all digital satellite receivers.
The RC027 will also operate the basic functions of many
popular TVs, after the correct code has been entered, see
"How to set up your RC027" (page 3).
USER GUIDE
Introduction
RC027B
27524R/S
RC027 SLx Digital Satellite Remote
Universal Pre-programmed Remote Control
Set up instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 2-4
Codes for televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 5-8
Installing Batteries
Your RC027 requires 2 fresh AAA-size (LR03) batteries
(alkaline batteries recommended) :-
1. Remove the battery cover on the back of your RC027.
2. Insert the batteries ensuring that the polarity
corresponds with the markings in the battery
compartment.
3. Push the battery cover back in place.
Please Note
The TV code set-up procedure will cancel itself if no keys are
pressed for more than 10 seconds (in order to protect your
code against accidental re-programming, and to conserve
battery power). Therefore we advise you to read the
following instructions and to familiarise yourself with the
procedures, before attempting to program your RC027 to
operate TV functions.
Customer Careline: 0901 293 0038
Calls are charged at £1 per minute from a BT landline
Call charges from other networks may vary.
