The RC027 remote has been designed as a direct replace-
ment for existing digital satellite receiver remote controls
(eg Sky™ and Sky+™)*. All functions are the same and the
layout mirrors that of original remotes to make life as easy
as possible for the user. The RC027 is fully preprogrammed
to operate all digital satellite receivers.The RC027 will also
operate the basic functions of many popular TVs, after the
correct code has been entered, see "How to set up your
RC027" (page 3).
Customer Care Line - Tel: 08457 573479 (UK only)
USER GUIDE
Introduction
RC027
RC027 SLx Digital Satellite Remote
Universal Pre-programmed Remote Control
Set up instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 2-5
Codes for televisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 6-8
Installing Batteries
Your RC027 requires 2 fresh AAA-size (LR03) batteries
(alkaline batteries recommended) :-
1. Remove the battery cover on the back of your RC027.
2. Insert the batteries ensuring that the polarity
corresponds with the markings in the battery
compartment.
3. Push the battery cover back in place.
Please Note
The TV code set-up procedure will cancel itself if no keys are
pressed for more than 10 seconds (in order to protect your
code against accidental re-programming, and to conserve
battery power). Therefore we advise you to read the
following instructions and to familiarise yourself with the
procedures, before attempting to program your RC027 to
operate TV functions.
