Variable gain control
After installing your SLx booster rotate the
variable gain control (shown in the diagram
opposite) to get the best picture/sound. Bear in
mind that the signal can be too strong as well as
too weak.
See Trouble Shooting section opposite for
more details.
SLx logo backlight LED configuration
SLx logo backlit
- Power on
Amber LED - Surge and Spike Protection
When the amber light comes on the SLx logo
backlight will go out. This indicates that there
has been a power surge or spike, this will return
to normal and will require no action by yourself.
After the power surge or spike has passed the
amber light will go out and the SLx logo will be lit
again. This feature ensures that you have that extra
protection and peace of mind.
Red LED -Short Circuit Protection
After connecting a flylead to the SLx booster and
before connecting the flylead to a TV/set top box,
if the red LED light comes on, there is a short circuit
between the central conductor and the braiding
on this coaxial cable.
Check the wiring of the connectors/connections
on both ends of the cable to see if there is a strand
of braid touching the central conductor.
If so, rewire the connection so that the braid is well
clear of the central conductor and retry procedure.
Note
: Red LED will also light up when flyleads are
connected to a TV or set top box this is normal and
does not indicate a fault.
Operating Instructions
Inputs
Outputs
UHF Freq.
VHF Freq.
Max output
Gain
Noise
Isolation Loss
1
1
470-790MHz 30-300MHz
86dBµV
14dB
<4dB
20dB
Specifications
