13
Temperature
Offset
2
0
-32768
~32767
Temperature offset
settings
14
Temperature
Threshold
2
5
1~32767
Temperature reporting
threshold
15
Max Value
Illuminance
Sensor
4
10000
1~200000
Maximum Illuminance
Sensor range value
16
Illumination
Offset
4
0
-200000
~200000
Illumination offset
settings
17
Illumination
Threshold
4
1000
1~200000
Illumination reporting
threshold
18
General
Threshold
1
5
1~100
General reporting
threshold
Notice 1:
Always Reset a Z-Wave™ device before trying to add it
to a Z-Wave™ network.
Notice 2:
PAD18 can be operated in any Z-Wave™ network
which provided by other certified Z-Wave™ Controllers. All non-
battery operating devices act as repeaters to increase the stability
and reliability of the Z-Wave™ network.
Over-the-Air (OTA) Firmware Update
The device is supported with Z-Wave™ firmware update via OTA.
1.
Set the Z-Wave
TM
Controller into the firmware update mode.
2.
Choose the hex file to update the firmware.
3.
Wait 10~15 minutes for completing the OTA process.
4.
Result of OTA will show in Z-Wave™ Controller log.
During the OTA process, please DO NOT remove the power,
otherwise, the firmware will be broken, and the device will be
nonfunctional.
Z-Wave™ Supported Command Class
Command Class
Version
Required Security Class
Z-Wave Plus™ Info
2
None
Security
1
None
Security 2
1
None
Supervision
1
None
Transport Service
2
None
Association
2
Highest granted Security Class
Association Group Information
3
Highest granted Security Class
Device Reset Locally
1
Highest granted Security Class
Firmware Update Meta Data
5
Highest granted Security Class
Indicator
3
Highest granted Security Class
Manufacturer Specific
2
Highest granted Security Class
Multi-Channel Association
3
Highest granted Security Class
Powerlevel
1
Highest granted Security Class
Version
3
Highest granted Security Class
Configuration
4
Highest granted Security Class
SENSOR MULTILEVEL
11
Highest granted Security Class
SWITCH MULTILEVEL
4
Highest granted Security Class
6
