Usercode
note: User code ID range is 1~30,
User code Status 0x00, Usercode length is
4~10,
S2 inclusion 1.User can get our Full DSK string on my
battery cover
notice: underline five digit is PINcode
Ex: mydsk
10190-35370-09760-44693-14490-09979-
57572-04945
2.Let Gateway in inclusion mode, User can key
first five digit on our App UI, then if first five
digit is correct, S2 inclusion can success.
Smart start 1.User can scan our Qrcode on our app, and
then if device power on , device can auto
include
2.SmartStart enabled products can be added
into a Z-Wave network by scanning the Z-Wave
QR Code present on the product providing
SmartStart inclusion. No further action is
required and the SmartStart product will be
added automatically within 10 minutes of
minutes On in the network vicinity
*notice1:user must check device have be
exclude.
*notice2:the QR Code is printed on a material
that resists being removed.
*notice3:Qrcode is button of doorlock,
association The device support two group
Group 1 name: Lifename
Group 1 command list:
COMMAND_CLASS_BATTERY,
COMMAND_CLASS_DOOR_LOCK_V2,
COMMAND_CLASS_DEVICE_RESET_LOCA
LLY,
COMMAND_CLASS_NOTIFICATION_V3,
10
