background image

* AV Control

PSR03-B:
In Group-Button 1(Red LED), the top-left key and bottom-left key 
control Volume Up(0x0003) and Volume Down(0x0002), and the top-
right key and the bottom-right key control Channel Up(0x0004) and 
Channel Down(0x0005). 
In Group-Button 2 (Green LED), the top-left key and the bottom-left 
key control Play(0x0013) and Stop(0x0014), and the top-right key and 
the bottom-right key control Fast Forward(0x0016) and 
Rewind(0x0017).

Simple AV Control Set (V4)

Group-Button 1

Key: Top-left

Command: 0x0003

Universal Label: Volume Up
Key: Bottom-left

Command: 0x0002

Universal Label: Volume Down
Key: Top-right

Command: 0x0004

Universal Label: Channel Up
Key: Bottom-right

Command: 0x0005

Universal Label: Channel Down

Group-Button 2

Key: Top-left

Command: 0x0013

Universal Label: Play
Key: Bottom-left

Command: 0x0014

Universal Label: Stop
Key: Top-right

Command: 0x0016

Universal Label: Fast Forward
Key: Bottom-right

Command: 0x0017

Universal Label: Rewind

PSR03-A:

The left key controls Volume Up(0x0003) and the right key controls

Volume Down(0x0002)

Simple AV Control Set (V4)
Key: Left

Command: 0x0003

Universal Label: Volume Up
Key: Right

Command: 0x0002

Universal Label: Volume Down

* Lighting Group Control

PSR03-B:

Each group-button controls four lighting groups through keys around 

the central key. Switch ON/OFF the lighting groups by pressing those 

keys once/twice quickly. For example, if you want to turn on lighting 

group 1, press central key to switch to mode 1(Red LED) then press the

top-left key once. If you want to turn off lighting group 7, press the 

central key to switch to mode 2(Green LED) then press the bottom-left 

key twice quickly. 

Summary of Contents for PSR03-A









Reviews: