2
control the ON/OFF
Switch of the load
attached
has its own ON/OFF
switch
2. The switch is protected
2. Unprotected the switch or follow the
instruction of protection.
The Switch LED
illuminating, but the
Detector cannot control
the Switch
1. Not carry out
association
2. Same frequency
interference
1. Carry out association
2. Wait for a while to re-try
LED keep flashing, but
cannot control
Overload occurs
Remove the load attached or check
max. load cannot exceed 13A (Resistive
load)
For Instruction to http:// www.philio-tech.com
Socket Type
Since the socket type for each country in Europe varies, refer to the outline for each
socket suited for each country as follows:
PAN16-1 German PAN16-2 French PAN16-3 U.K.
Note:
Please make sure that the intensity of the plug of the electrical device must be
16A and have same head as the enclosed plug before inserting to the socket.
DANGER
Danger of electrocution!
All works on the device may be performed only by a qualified and licensed electrician.
Observe national regulations.
Any works introducing changes into the configuration must be always performed with
disconnected voltage.
